Main integral technical parameters

1. Highest speed: 45km/h

2. Load 150kg

3. Rated power of motor 1500W

4. Rated voltage of motor DC60V

5. Voltage and capacity of battery 60V/20AH

6. Charging time: 8 hours

7. Distance sustained by one cycle of charging: 60km (Under standard test conditions, at the average speed of 45 KPH)

8. Power consumed in one cycle of charging: ca.1.2kW.h

9. Outside dimensions: overall: length1900mm Width745mm height 1100mm

10. Integral weight: 124kg

11. Central distance between the front and the rear wheel: ca.1290mm

Note to charging

1. This bicycle uses the built-in charger and at charging the power switch of the bicycle should be cut off.

2. First insert the output plug of the charger into the in-bicycle charging socket, and insert the input plug of the charger into the household socket. The charging indicator will show on which means the power is connected and the charging is in progress.

3. When fully charged the indicator will move from red to green please do not leave the charger on indefinitely.

4. The lead-acid battery in the bicycle is merely applicable to our charger. Chargers of other manufacturers should not be used or the battery may be damaged.

5. During charging, the charger should not be covered and should be kept away from heat sources.

6. During charging the temperature of the casing will rise (generally not above 40℃) and is a normal phenomenon.

7. During use and storage, the charger should be prevented from damage due to liquid spillage or metallic particles inside it.

8. Try to avoid totally running out of power as this will help improve the battery life.

9. The charger is a high-tech electronic product and should not be opened except by qualified people.

10. Low temperature can impact the battery’s charging and discharging capacity and in winter the usual sustained mileage may decrease a little